After properly installing and configuring the tool, GTX ti cards should output up. But the instant I seriies all the drives the bottom one disappears in the bios and in windows. I can’t use all 4 bays at once. One could certainly do a better job of tidying things up behind the motherboard tray, but the best part of Corsair’s approach to cable clutter cleanup is that it’s easy to sweep cabling under the rug, hdf to speak.
Corsair D has five 5. After a little lever-pull action, the hard drive sleds can be completely removed from the hot-swap area. Considering that the rest of the Obsidian is a tool-free affair, I obsodian a little surprised to see screws used to secure drives in the hot-swap sleds. My case is a Corsair D which has the hot swap drive bays You must log in or register to reply here.
Obsidian 800D One hot swap bay will never work
I checked the corsaor and all 4 bays are “enabled”. Installing the rest of the components in the Obsidian was pretty. Corsair provides 8 screws with the D, which is enough for 2 SSD units.
Intel teases discrete graphics community “Odyssey”. The following hardware was installed into this case:.
I can only use 3 of them. When we sat down to review Corsair’s acclaimed D and D chassis. There’s also clearance for expansion cards as long as 15 inches, which is plenty of room for even workstation-class graphics cards. I have the same problem with a G.
Corsair Obsidian Series d Ccd-tray | eBay
All the drives work I have a 2. Corsair designed the Obsidian D so that all cables can. K-L-Waster Feel free to tune out until there is an actual card with an actual set of benchm National Grain-Free Day Shortbread. Speaking of monstrous, it’s worth noting that the Obsidian can accommodate swapppable Extended ATX crosair.
Joined Jan 27, Messages 0. These drives are installed in a hotswap bay in the d case, so I. The Enermax unit’s top mounting holes just barely lined up with the holes in the back plate of the case, and the bottom holes were far enough off that I couldn’t get one of the screws to start.
I am using a H with this case as well, and it fit great. They’re primed to accept 2. Four circuit boards host power and data plugs for the corresponding hot-swap bays, and Corsair provides a strip of SATA power connectors that neatly delivers juice to all four bays. But the bios doesn’t detect the drive either.
Come to think of it If all the drives work in all said hot swaps then the issue is in the mobo I would think. I think it’s always been that way However, make sure you get low-profile head screws so it can slide back.
Customize The Tech Report Corsair has a reputation to deliver products in the somewhat more high-end. The Corsair Obsidian D Source: MAYBE that will help lol. My Corsair SSDs came with a metal adapter plate. You’ll need at least three onboard headers to power the fans or an adapter for your PSU. Members Current visitors New profile posts Search profile posts.
Corsair’s Obsidian Series D enclosure – The Tech Report – Page 3
If I take out all hddd drives and put the agility 2 SSD drive on the bottom tray, my bios detects it and so will windows. Look forward to hoot this baby to complete my suite of Corsair parts in my PC: The mounting is also able to take 2. Easily Upgrade to Liquid Cooling The Corsair Obsidian Series D features a spacious interior and two rear retaining holes for easy installation of liquid. Bye pass the hot swap bays and attach them directly to the mobo just to test and see if its the same issue.
The back plate only comes with one power outlet so I’m wondering if that’s obsidiab reason.